Hey guys!
Ash and I designed this wine rack and LOVE the way in which it turned out!
How cute is that this??
That’s such a simple assemble guys!
Sooner than we get started, attempt the video HERE!
Now… Click on on HERE to acquire and print the FREE PLANS!
Proper right here is your present guidelines for the wine rack!
First step is making all your cuts! We used a miter observed for this half. This is a shot of the cut back guidelines for these wine racks.
After making cuts, it’s time for pocket holes! We used our K5 Kreg Jig to make the pocket holes on each of our 11″ boards. Make sure you space these pocket holes as a result of the plans current in order that they line up with the once more board. You may make 5 of these…
We attached each of those 11″ boards to our 38″ board with picket glue and a few.5″ pocket hole screws. We started from the underside and spaced them every 6″.
Final step of assembly… Protect the bottles! To take care of them from falling off we added an 11″ craft board to the doorway of each 2×4.
We attached the doorway craft boards with picket glue and 1.25″ brad nails. These boards may very well be found on the ironmongery retailer or craft retailer, and so they’re super low-cost.
We stained our with Varathane’s new stain known as. We found cute brass labels 4 our wine rack. You may discover some HERE on Amazon!
Proper right here she is all accomplished up!
These make probably the greatest objects and it’s possible you’ll costume yours up to fit your space! It’s a super beginner endeavor and best weekend endeavor as properly. Inform us whenever you’ve acquired any questions the least bit!
