We constructed the cutest DIY Stylish Rustic End Desk for spherical $80 along with the legs! Strive the video!
How cute is that this desk guys?? Sooner than we get started, you need some legs! Proper right here is the hyperlink to the legs we purchased for our desk. We used 24″ prime and 12″ measurement!
It is also doable to acquire and print the FREE PLANS by clicking HERE!
Now let’s get started!
DIY Stylish Rustic End Desk Step by Step
Join the 1×2 boards to the enterprise panel first using picket glue and 1.25” brad nails. Two of the boards will possible be flush on all sides and the other board will possible be centered on the panel.
Now on to the chevron pattern. These are straightforward 45˚ cuts on each end. I did add the exact measurements to the cover sheet, but it surely certainly’s essential to measure and decrease as you go on this one! We found it greatest to make a variety of of the entire measurement piece, like below after which mark and decrease the smaller gadgets from the scrap of this stuff.
Once you finish one side, switch on to the following!
Now fill the smaller areas with the scrap you slim from the other boards. Rememner these are straightforward 45˚ cuts!
Upon getting made the entire cuts and dry match each factor, join all the patterned boards to the panel using picket glue and 1.25” brad nails.
The trim gadgets are moreover 1×3 baords. We chosen in order so as to add a 45˚ decrease to each nook to supply the desk a transparent accomplished look. Line the underside of each trim board up flush with the underside of the panel. This will depart the best with an overhang giving it a tray look.
Measure and decrease the rest of the trim boards to measurement and fasten them to the pores and skin of the panel using picket glue and brad nails.
Now you is perhaps ready for legs! Be certain that to confirm the website for a hyperlink to the legs we used. This would possibly moreover make the cutest tray! Add a pair pulls to the perimeters and also you is perhaps set! Have gratifying with it! Be certain that to tag us and use hashtag #shanty2chic whilst you share your builds!
