Happy Wednesday everyone! We’re so glad to be rounding the final word curve of our flip dwelling and getting it capable of put within the market. Proper now I have to share the DIY fashionable farmhouse consuming desk for the flip dwelling! This may be one in every of my favorite consuming tables I’ve constructed however… and that report is prolonged! Let’s get started! I’ve added a hyperlink to the printable mannequin of these plans on the bottom of this submit!
The first step to developing this desk is creating the desk excessive. These are 2×6 boards that we ripped down to 5”. We added 1.5” pocket hole screws down one prolonged aspect of all nevertheless 1 of our plank boards, and as well as on the ends of each plank board. We related the plank boards collectively first using 2.5” pocket hole screws. As quickly as all plank boards are related, line of the boards on each end and mark the exact measurement of the breadboards. Join the breadboards using 2.5” pocket hole screws.
Thought-about one among our favorite devices to utilize on this half is the Kreg Face Clamp. It permits us to flatten the boards merely. We merely run it alongside the seam as we go down each board. You’ll see it HERE on Amazon.
Now it’s time to assemble the legs. You will assemble 4 an equivalent leg assemblies.
The first step is to laminate 3 boards collectively. Add an excellent amount of picket
glue between each board, and repair them using 2.5” picket screws by way of
the floor objects and into the inside objects. I lined my screws up 5.5” from the best and three” from the underside so that the holes from the screws may very well be lined with trim in a later step.
On the bottom of your legs, measure and decrease 1×6 boards and repair them using picket glue and 1.25” brad or finish nails. Each nook is decrease at a 45˚ angle.
Now add the trim. I used 1.5” broad casing, nevertheless you can have pleasing with this half to get a very personalized look! Cut back each angle to 45˚ and repair merely above the 1×6 using picket glue and 1.25” brad or finish nails.
Measure and decrease the 1×2 trim subsequent. These are moreover decrease at 45˚ angles. Line them up 1” from the to of the trim piece, and repair using picket glue and 1.25” brad or finish nails.
The best 1×2 trim will possible be related the equivalent methodology. Line it up 5” from the best of each leg.
Now, join two of the leg assemblies collectively. These will join with the 2×6 (ripped to 4”) board by way of 1.5” pocket holes. Line the 2×6 board up flush with the best of each leg aseembly and centered as properly. Join using picket glue and a pair of.5” pocket hole screws. Repeat this with the alternative 2 legs.
Join the underside runner to every leg assemblies. These will possible be positioned 1” from the underside of each leg base and centered as properly. Join them using picket glue and a pair of.5” pocket hole screws by way of the 1.5” pocket holes.
Join the prolonged runners to each leg assembly. These will join with picket glue and a pair of.5” pocket hole screws by way of 1.5” pocket holes on each end of the prolonged runners. Ensure that to take care of the pocket holes going by down on this half.
The final word step is together with the plank desk excessive to the underside. After getting your desk positioned inside the room it will preserve in, line the desk excessive up centered on the underside and repair with 2.5” picket screws by way of the best runners and into the underside of the desk excessive. Don’t use glue on this half so you can disassemble and switch if wished.
Proper right here she is all accomplished up! We stained this desk using Varathane Picket Stain in Golden Oak. You’ll see it HERE on Amazon!
You’ll uncover the consuming chairs HERE!
You’ll uncover the desk runner HERE!
You’ll uncover the olive tree centerpieces HERE!
DIY Stylish Farmhouse Consuming Desk
Present File
- 13 2x6x8 ripped to 5″
- 3 2x6x8 ripped to 4″
- 3 1x2x6 pine or white picket
- 1 1x6x6 pine or white picket
- 1 1x6x4 pine or white picket
- 1 1.5″ broad casing at least 96″ pine
Instructions
-
The first step to developing this desk is creating the desk excessive. These are 2×6 boards that we ripped down to 5”. We added 1.5” pocket hole screws down one prolonged aspect of all nevertheless 1 of our plank boards, and as well as on the ends of each plank board. We related the plank boards collectively first using 2.5” pocket hole screws. As quickly as all plank boards are related, line of the boards on each end and mark the exact measurement of the breadboards. Join the breadboards using 2.5” pocket hole screws.
-
Now it’s time to assemble the legs. You will assemble 4 an equivalent leg assemblies.
The first step is to laminate 3 boards collectively. Add an excellent amount of picket
glue between each board, and repair them using 2.5” picket screws by way of
the floor objects and into the inside objects. I lined my screws up 5.5” from the best and three” from the underside so that the holes from the screws may very well be lined with trim in a later step.
-
On the bottom of your legs, measure and decrease 1×6 boards and repair them using picket glue and 1.25” brad or finish nails. Each nook is decrease at a 45˚ angle.
-
Now add the trim. I used 1.5” broad casing, nevertheless you can have pleasing with this half to get a very personalized look! Cut back each angle to 45˚ and repair merely above the 1×6 using picket glue and 1.25” brad or finish nails.
-
Measure and decrease the 1×2 trim subsequent. These are moreover decrease at 45˚ angles. Line them up 1” from the to of the trim piece, and repair using picket glue and 1.25” brad or finish nails.
-
The best 1×2 trim will possible be related the equivalent methodology. Line it up 5” from the best of each leg.
-
Now, join two of the leg assemblies collectively. These will join with the 2×6 (ripped to 4”) board by way of 1.5” pocket holes. Line the 2×6 board up flush with the best of each leg aseembly and centered as properly. Join using picket glue and a pair of.5” pocket hole screws. Repeat this with the alternative 2 legs.
-
Join the underside runner to every leg assemblies. These will possible be positioned 1” from the underside of each leg base and centered as properly. Join them using picket glue and a pair of.5” pocket hole screws by way of the 1.5” pocket holes.
-
Join the prolonged runners to each leg assembly. These will join with picket glue and a pair of.5” pocket hole screws by way of 1.5” pocket holes on each end of the prolonged runners. Ensure that to take care of the pocket holes going by down on this half.
-
The final word step is together with the plank desk excessive to the underside. After getting your desk positioned inside the room it will preserve in, line the desk excessive up centered on the underside and repair with 2.5” picket screws by way of the best runners and into the underside of the desk excessive. Don’t use glue on this half so you can disassemble and switch if wished.
