DIY Stylish Farmhouse Cabinet

I LOVE LOVE how cute this problem turned out mates! If there’s one issue that I on a regular basis need further of at my dwelling, it’s storage! We constructed this dwelling with three kids, after which we added 3 further. Practically every room has been was a mattress room (really), and I am repeatedly making an attempt to assemble points that not solely profit from what home I do have, however as well as objects that preserve the entire points. I imagine as we communicate’s DIY modern farmhouse cabinet does merely that! I beforehand constructed a sideboard to hold a number of white dishes. The dimensions was good for this home, nevertheless have found over time that I wasn’t using close to as many dishes as I had collected (#hoarder), so I decided to prioritize. I saved the dishes I used most and moved them to the open shelving, and designed this piece to now preserve my craft stuff. I preserve my Cricut in proper right here along with all my vinyl, leather-based and completely different goodies. It’s my dream come true! Attempt how pretty it turned out!

Sooner than we get started, make sure you acquire and print the FREE PLANS by clicking HERE!

Practically all of this piece makes use of hardwood plywood. What the heck is that? Good question! Hardwood plywood is plywood that’s accessible in 4′ x 8′ sheets and s0me smaller sizes. Our very favorite mannequin to utilize is Purebond Plywood. Yow will uncover it at Dwelling Depot. The floor layer of the plywood is a hardwood veneer like oak or birch. So, you get the look of a hardwood on the value of plywood. Can’t beat that folk! Plus, it’s super straight making it easy to work with which makes me fully glad!

The plywood sheets are large, and typically inconceivable to swimsuit into your automotive… Notably while you may need 6 kids throughout the once more 😉 We desire to have Dwelling Depot make the rip cuts for us as a solution to get it throughout the automotive at residence.

As quickly as I had it residence, I made most of my completely different cuts using Kreg’s Spherical Observed Info.

It’s a really cool attachment that matches onto your spherical observed. You probably can regulate it to make straight cuts at certain measurements. It’s very appropriate and easy to utilize.

Truly this assemble might be very straightforward. It’s large… Nonetheless, straightforward. You assemble the sphere of the sideboard first, after which add the trim and the doorways. For the sphere, I used my Kreg Jig. Proper right here is our very favorite model. You will thank us for suggesting it!

I used 3/4″ pocket holes and 1.25″ pocket hole screws for all of my joints. I moreover used a line of picket glue on each joint. You probably can see beneath my placement of the pocket holes. Attempt the most effective glue instrument ever! This issue makes gluing very easy!

I moreover decided in order so as to add a small piece throughout the middle to operate a brace for the burden to keep up it from sagging. I plan to fill this little one up with dishes! I did this by decreasing a small piece of the plywood and attaching it with picket glue and pocket hole screws.

You will use a drill with the Kreg bit to attach all of these screws. The bit is included with the Kreg Jig. I used my Ryobi 18V One+ drill for mine. WE LOVE THIS DRILL. It’s the correct dimension and has a ton of vitality. I even have 2 to keep up me from switching bits… #lazygirlprobs 😉

After you’ve your full area assembled you may add your trim objects. I used my brad nailer for this half.

The underside of my sideboard appeared like this….

And it’s framed!

Subsequent, I constructed and attached the planked prime. I created the plank prime by using 3/4″ pocket holes down 4 of my 5 boards. Then, I used 1.25″ pocket hole screws by the use of these to attach all of it.

Sooner than attaching it to the best I added a bunch of picket glue to the best of my sideboard. I had a bit of bit fulfilling with this half…

To attach the best, I used my Kreg bar clamps. I like easy bar clamps. These are so superior… They’re self adjusting and easy to utilize. I used mine to hold the best in place whereas I used the tip nailer to attach the best with 1.25″ finish nails.

To create the doorways, I used my Kreg Jig as correctly. I made the pocket holes on my shorter objects and attached them to the longer ones using 1.25″ pocket hole screws.

Although we give you guys the cuts for these doorways, I on a regular basis desire to measure the opening sooner than making the cuts to verify on the dimensions. I desire to make the doorways 1/8″ smaller all through, which could be 1/4″ smaller than the width and prime of each opening. For the doorways, you may have 4 longer objects with out pocket holes like this.

Moreover, you’ll have 4 smaller objects each with pocket holes on every ends like this.

I attached these things using picket glue and 1.25″ pocket holes screws to create rectangles.

Each door seems to be like like this!

At this degree I attached the backs of each door. That’s 1/4″ hardwood plywood scale back to dimension. Join it to the once more of each door physique using picket glue and 1/2″ staples or nails.

Now to create the lovable trim! I used 1/4″ thick craft boards for this half. Yow will uncover these throughout the lumber half by completely different trim boards, they usually’re usually stacked flat close to the bottom.