We’re once more with one different problem in our sisters ShantyHouseCrash sequence! This week we’re shifting once more into the kitchen and exhibiting you recommendations on how one can assemble this DIY Spherical Hairpin Desk! You solely need only a few devices, 5 – 2×6 boards and 4 chunky hairpin legs! So, seize a cup of espresso and let’s go assemble this cutie!
Merely click on on HERE or the video below to look at!
You presumably can acquire the FREE Printable Plans HERE and observe alongside below with the step-by-step tutorial! I’m moreover sharing how I constructed the jig, for the plunge router, below!
First, we ran the 2×6 boards through a desk observed to tear the spherical edges off. This made the boards 5″ in depth. This is not a necessary step nevertheless it ought to give a straightforward desk prime! Be sure to manage the measurements accordingly ought to you choose to not rip your edges.
Subsequent, we decrease our boards to measurement and drilled 1 1/2″ pocket holes into the perimeters of each board. Search recommendation from the plans for the placement of these pocket holes. You may discover our favorite model of Kreg Jig HERE!
To assemble the desk prime, we began by attaching the two middle planks collectively. We used 2 1/2″ pocket hole screws and our Kreg Jig Face Clamp. The face clamp is good for shielding the planks flush with each other if you’re assembling. Merely clamp down over each pocket hole, the place the two boards meet.
We adopted up with the rest of the planks. Be sure to debate with the plans for the placement of each plank!
As quickly because the planks had been all attached, we used our Ryobi Plunge Router, on a handmade jig, to cut the desk prime circle. We shared a how-to for the house made jig in course of the underside of this submit.
The last word step of assembly was attaching the hairpin desk legs. You may discover the desk legs that we used HERE!
We gave it a coat of stain and a defending finish and that was it! You may discover the stain that we used HERE and the poly that we used HERE!
It’s the correct desk for this home and it gives the kitchen so much vogue and character!
Click on on the hyperlinks below for for info and sources!
Plunge Router Jig Tutorial:
You’ll need this bit to cut the circle with this plunge router. We bought ours HERE.
Take away the clear, plastic guard from the doorway of the router.
To change the bit, keep down the lock on the side of the router.
Use the wrench, that received right here with the router, to loosen the nut.
As quickly because the nut is free ample, slide the bit all of it the best way by which, then once more it out a hair.
Tighten the nut once more up with the wrench and change the clear, plastic guard.
Subsequent, decrease a 1×6 board to about 32″ prolonged.
Preserve the plunge router on the end of the board and mark the place the bit will enter and drill a pilot hole.
Use a 1″ paddle bit to drill a 1″ hole for the router bit.
Place the router once more on the board and mark the screw holes to attach the router to the jig. We used 2 machine screws with nuts.
Join the router to the board from the underside of the board and up into the router. Secure the machine screws with the nuts.
Flip the jig the mistaken approach up and measure 24″ from the inside of the router bit to the opposite end of the board.
Drill a 1 1/4″ screw into the board from the underside
and into the center of the underside of the desk prime.
Set the plunge depth to solely decrease 1/4″ for the first transfer. (This was my first try to I set it to 3/4″. That was far too deep for this measurement bit and it fought the planks pretty harmful. I constructed the desk prime as soon as extra and went at 1/4″ handed and it was large easy).
Use the lever on the once more of the router to lock the plunge depth. This will will allow you to cope with slicing the circle with out having to push down while you decrease.
Switch the router, slowly, throughout the desk prime. Proceed making 1/4″ passes until you are through your whole desk prime. Must take about 6 passes.
That’s it! Great easy, large straightforward and large spherical 😉
Check out your entire totally different duties from this Shanty House Crash sequence below!
Farmhouse Consuming Desk – Free plans and how-to video dwell, now!
DIY Driftwood Backsplash – Free plans and how-to video dwell, now!
How one can Add Prime to Kitchen Cabinets – Free Plans and how-to video dwell, now!
Personalized Cabinet Trim Hack – Free Plans and how-to video dwell, now!
How We Paint Cabinets –Free Plans and how-to video dwell, now!
How one can Physique and Cowl a Crescent Window – Free Plans and how-to video dwell, now!
DIY Spherical Kitchen Desk – Free plans and how-to video dwell, now!
DIY Pipe Cupboards – Free plans and how-to video dwell, now!
DIY Barn Door for Pantry – Free Plans and how-to video dwell, now!
Thanks so much for stopping by!
Fully glad Developing!!
