We’re once more with the next piece of our “Retail Spot Renovation” puzzle! Every retail home needs a welcome desk nonetheless we wanted to assemble one factor that may moreover act as a consuming desk – for you guys 😉 So, we designed this DIY Pew Bench Farmhouse Desk!
We love that it appears to be found, it solely makes use of 8 boards AND it solely worth us about $65 in lumber! Seize a cup of espresso and can be found assemble it with us!
DIY Pew Bench Farmhouse Desk – The Free Plans!
Merely click on on proper right here or the image below to have a look at! And, don’t overlook to acquire the FREE PRINTABLE PLANS HERE!
The video!
Very easy, so pleasing and so cute! You probably can adjust to alongside below inside the how-to, as properly!
The step-by-step tutorial!
To start out, I used my Ridgid desk seen to tear all the spherical edges off of the boards. You probably can examine with the plans for the exact width that I ripped all of them the way in which all the way down to.
DIY Pew Bench Farmhouse Desk – Kreg Jig
As quickly because the boards have been ripped, we used our Kreg Jig to drill 2 1/2″ pocket holes in all the boards. Seek the advice of with the plans for pocket hole placement! You’ll uncover our favorite Kreg Jig model HERE on Amazon!
Our first step in assembly was to plank the desk prime. We used 2 1/2″ pocket hole screws to attach the desk prime planks.
Subsequent, we assembled the facet, leg bases. We used picket glue and and a few 1/2″ pocket hole screws.
DIY Pew Bench Farmhouse Desk – Glue Bottle
We decrease the trim gadgets to measurement and utilized picket glue to the inside of each piece (we LOVE this glue bottle and you’ll uncover it HERE on Amazon)!
and linked them to the leg bases with 2 1/2″ pocket hole screws.
As quickly because the bases have been assembled, we linked the bases to the toes with 2 1/2″ pocket hole screws and picket glue.
Subsequent, we linked the apron gadgets to the bases with 2 1/1″ pocket hole screws and picket glue. Be sure that the pocket holes are going by way of contained within the desk and up, so that they are often utilized to attach the planked prime.
We centered the runner and linked it to the underside with 2 1/2″ pocket hole screws and picket glue.
As quickly as the underside was assembled, it was time to attach the underside to the planked prime. We used 2 1/2″ pocket hole screws and drilled from the bases and aprons into the desk prime.
The last word step in assembly was to attach the “pretend end gadgets” of the runners to the floor of the bases. We used picket glue and a few″ finish nails, with our 16 gauge finish nailer, to attach! (you’ll be able to too use an 18 gauge brad nailer proper right here).
DIY Pew Bench Farmhouse Desk – the paint!
For the top, we painted the underside with a flat white paint, you’ll uncover it HERE on Amazon. For the underside, we used Honey Maple Stain, you’ll uncover it HERE on Amazon!
Be sure that to try the other gadgets on this renovation! Merely click on on the hyperlinks below!W
Espresso Bar
Floating Day Mattress
Wood Wall
Sliding Barn Door Hack
Stencil Wall
