Hey buddies! This enterprise was lots pleasurable! I am serving to my youngsters’ school do some renovating since they’re rising. The model new director might be getting a model new office proper right here in only a few weeks, and he or she requested me to help her shanty it up a bit ?. Positive, please! To help get financial financial savings, I decided to repurpose just a few of her outdated gadgets to make new gadgets for the model new home. I LOVE how this one turned out. The most effective half, I was able to find you guys comparable legs for $25 a piece on Amazon! You could possibly discover these HERE! Sooner than I get to the plans, attempt the how-to video by clicking the video participant underneath!
Didn’t that find yourself so cute?? I consider she’s going to love it throughout the new home. I might be sharing the whole home as we get further work carried out on it!
Now, let’s get started on the assemble. You presumably can acquire and print the FREE PLANS by clicking HERE!
The first step is setting up your desk prime. Rip the planks and breadboards to 5” each using your desk seen. These are 2×6 boards.
Subsequent, use your Kreg Jig in order so as to add 1.5” pocket holes down one prolonged facet of 5 of the plank boards and add 1.5” pocket holes one each temporary end of all 6 boards. I used my new Kreg Jig 720 PRO. LOVE THIS JIG. It is my favorite one to this point! You presumably can see it HERE on Amazon!
Now join your planks using 2.5″ pocket hole screws by the use of the pocket holes one the 5 boards. Make certain each board is flush on each end and as well as flush on the edges. I used my Kreg Face Clamps to help me on this half! They’re so helpful for this! You presumably can see these I used HERE on Amazon.
After getting the entire planks attached you’re ready in your breadboards. I like to hold the breadboard piece as a lot as my planks to get a exact measurement for this half.
Join the breadboards by the use of the pocket holes on the ends of each plank board using 2.5″ pocket hole screws. You might also use your Kreg Face Clamp for this half too!
Now it’s time to begin out setting up the apron. I wish to place the legs on the desktop at this degree and mark with a pencil the place each will line up.
Then, chances are you’ll merely measure for each apron piece. The aprons are comprised of 1×4 boards. Decrease each board to measurement and add 3/4” pocket holes on the board in step with the place I drew them throughout the plans.
As quickly as your whole pocket holes are made, join each apron piece to the desk prime using wood glue and 1.25” pocket hole screws.
As quickly as your apron is accomplished, you are ready to cut and repair the drawer help boards. I used scrap 3/4″ plywood for mine, nonetheless throughout the plans I identify for 1×4 on account of it’s best to have adequate leftover from the apron gadgets. Add 3/4″ pocket holes on these boards using your Kreg Jig and repair them to the desktop and to the doorway apron gadgets using 1.25″ pocket hole screws.
Now it’s time to assemble our drawer! This half is large simple. I constructed the whole factor from one 24″x24″ 1/2″ thick plywood panel to keep up the worth down. I used my desk seen to cut the plywood to sides. Assemble the drawer subject first by attaching the corners with wood glue and 1.25″ brad nails.
Subsequent, join the underside of the drawer using wood glue and 1.25″ brad nails as correctly.
At this degree, chances are you’ll stop and repair your drawer slides. Make certain you watch the video to see how I put in mine. It’s simple!
Time for legs… YEAH! Keep in mind, you may discover very comparable legs to mine that work fully with these plans HERE ON AMAZON! And, they’re solely $25 a leg!
I attached my legs using wood glue and a pair of″ pocket hole screws by the use of the apron pocket holes and into each leg.
Lastly I reduce and attached the drawer face. I want to nail it in place a pair events, after which open the drawer and reinforce it with screws by the use of the inside of the drawer and into the drawer face.
Now you are ready for paint and stain! I used Sherwin-Williams Pure White for the underside and legs of the desk. I mixed Varathane stain to get the desk prime finish. I combined two stains to realize this shade…
I actually like how she turned out! Proper right here it is in my retailer, nonetheless I can’t wait to level out you it prepare throughout the new office as soon as we get it in there.
