I am SO excited to share this piece with you proper this second… It positively has made my Prime 5 builds however!
I’ve a love for espresso. LOVE, it’s part of my every morning routine. I have been a Keurig proprietor for a few 12 months now, which took my espresso wish to a superb higher diploma, you hear me? The one issue I don’t love about my Keurig is the amount of space it takes up on my countertop. I decided it was time to current it a model new residence. That’s what I bought right here up with! Attempt my new DIY Farmhouse Espresso Cabinet!
Okay, so although I am calling it a espresso cabinet, this little one may be utilized for completely something! It’s a superb piece of furnishings for any space, it’s an awesome measurement and gives a variety of storage. The whole piece could also be very straightforward to assemble using a few devices.
As always, you presumably can receive the FREE PRINTABLE PLANS with the provision itemizing included, for this cabinet HERE, or by clicking the button below. I am going to stroll you through your entire assemble tutorial below, as correctly!
So, lets get started! Merely a head’s up… I did assemble mine barely in one other means than our plan requires. I added a further piece of wood on the prime to create a subject. It’s not necessary to do that, so we left it off the plans. Each means will work! Merely let me know any questions. 🙂
The cabinet subject and cupboards are made with 3/4″ Purebond Plywood. This can be found at Residence Depot in 4′ x 8′ sheets. For me, it’s unattainable to get it residence throughout the Suburban with the 5 kiddos, so I’ve the great guys at Residence Depot rip it down for me. For this cabinet, I had them rip two cuts at 15 3/4″ and one scale back at 15″. You presumably can see the diagram below to see what I indicate…
This gave me three boards that are MUCH easier to load throughout the vehicle. After I obtained it residence, I made your entire completely different cuts using my Ridgid Miter Observed, aka, my highest good buddy ever.
The first step is setting up the sphere of the cabinet. This half makes use of the 15 3/4″ plywood.
To connect all of my objects, I used my K5 Kreg Jig! We get requested regularly which model of Kreg Jig we use. Ash and I every used the K4 model for years and adore it. You presumably can see that model HERE
. We every currently upgraded to the superior K5 model, which has some cool upgrades and choices making it even faster and easier to utilize. You presumably can check out the K5 model HERE
For this entire assemble, I used 3/4″ pocket holes and 1 1/4″ pocket hole screws.
I put the sphere collectively like this below using 1 1/4″ pocket hole screws by the use of your entire pocket holes I already made. On our scale back lists throughout the printable plans, wherever you see an arrow on a bit of wood, that signifies a pocket hole. Make it possible for to make all of your pocket holes sooner than attaching one thing!
You presumably can see I’ve lined up the underside shelf of the piece at 3.5″ from the underside of my facet objects.
I used a line of Gorilla Wood Glue on each seem and held all of it in place with my Kreg Correct Angle Clamp. I used my Ryobi drill to drive the 1.25″ pocket hole screws by the use of the pocket holes and into the facet objects.
This could be a picture of the very best of the sphere. I’ve it turned upside-down on the underside. You presumably can see the pocket holes I made proper right here moreover attaching to the facet objects. The very best of the cabinet may be flush with the very best of the two facet objects.
And bam… You may need a subject! 🙂
Now, add the middle shelf! Join it with pocket hole screws by the use of pocket holes and into the very best and bottom of the sphere.
Subsequent, I added my bottom trim objects. I used a line of wood glue and my Ryobi AirStrike 18 gauge nail gun to attach the trim objects.
I moreover added my bottom trim piece the an identical means on this half.
Now to assemble that face physique! That’s straightforward! Just a few quick straight cuts and some pocket hole screws. I am wanting from the once more of the cabinet and into the doorway the place you presumably can see the pocket holes on the underside the place this half attaches to the underside trim piece.
I added my cupboards subsequent! Each cabinet piece may be flush with the once more of the cabinet and set once more 3/4″ from the doorway.
You presumably can set yours the place you wish to fit your storage desires. On one facet I chosen to space two evenly, and on the alternative I set one a bit lower so I could have an space for the Keurig. Each shelf will need pocket holes on each 15″ prolonged end to hook up with the edges of the cabinet.
I constructed my cabinet doorways subsequent!
Although we give you guys the cuts for these doorways, I always favor to measure the opening sooner than making the cuts to ensure on the dimensions. I favor to make the doorways 1/8″ smaller all through, which is perhaps 1/4″ smaller than the width and high of each opening. For the doorways, you may have 4 longer objects with out pocket holes like this.
Moreover, you should have 4 smaller objects each with pocket holes on every ends like this.
I related these things using wood glue and 1.25″ pocket holes screws to create rectangles.
Each door seems like this!
As quickly because the doorways had been accomplished I related my once more. You presumably can have Residence Depot scale back this for you as correctly, and use staples to hold the once more in place as a result of the supplies is only one/4″ thick.
The very best is planked boards. I used my Kreg Jig to attach these as correctly sooner than nailing them proper right down to the cabinet.
Now for the drawer… My fav half!
I decided to make considerably pullout drawer for the espresso maker to take a seat down on. I assumed this might make the water easier to change out, and it was merely plain cool. That’s SO straightforward.
I started by decreasing a bit of three/4″ plywood at 14″ x 15.5″.
I trimmed this out with 1×2. Merely scale back two objects at 14″ and repair them collectively along with your nail gun.
Your subsequent two cuts may be 17″ and may be related to the alternative sides. I used the nail gun and glue to attach these things as correctly.
Now for the slides! To make this simple I used some facet mount slides nonetheless related them to the underside of the drawer. I started by pulling them open and attaching them first to the underside of the drawer.
Then, I pushed the pull once more into place and set it inside the cabinet on that one prime shelf. I slowly pulled it out which opened up the slide as soon as extra. Then, I merely related the pull to the inside of the shelf. Easy!!
Sooner than together with the entire {{hardware}}, I obtained all of it painted up. I started by staining lots of the piece with a model new shade that I actually like…
After that fully dried, I used a little bit little bit of Vaseline on my edges and corners. It doesn’t take loads, solely a thin dab! Subsequent, I utilized two coats of paint to the cabinet. I chosen to utilize a Sherwin-Williams shade known as Anonymous. I LOVE IT! As quickly as that fully dried, I used my nook cat sander to distress the edges a bit. Anyplace that I put the Vaseline merely chipped correct off… Woohoo!
I found all of my {{hardware}} at Residence Depot. The hinges are actually silver colored and I spray painted them black sooner than attaching.
I used this {{hardware}} cloth on the inside cloth of the doorways.
I used a small pair of pliers to cut it to measurement, and related it using my Ryobi Airstrike Staple Gun.
Whew…. Please inform me I’m completed. I really feel I coated all of it 🙂
Oh, minus a few additional photos of this little one and the entire tools!
You presumably can add a few hooks for a singular capabilities. I chosen to place in a single on the facet for my cute decreasing board.
I found this cute mug tree at World Market.
And the way in which cute is that this tray with baskets I found at one among my FAV web sites ever?! It’s known as www.save-on-crafts.com ! You guys… This web site. They’ve the cutest residence decor goodies, and it’s so cheap! HERE is the hyperlink to the galvanized tray I full of creamer and sugar, it could possibly be good for k-cups or espresso pods, as correctly. $8.99 people. And see the lovable traditional inexperienced bottle throughout the background?? LOVE. You’ll uncover the hyperlink to that one HERE!
Hope you guys LOVE this cabinet as loads as I do… And my Keurig and low mugs do too ;-)!! I actually like the way in which it matches my kitchen cabinets and it’s a superb piece for small areas.
I’d LOVE to be able to pin and share this little one with all of your mates!!
Thanks loads for stopping by!
Whitney
Attempt our completely different DIY Farmhouse Espresso Bar ideas for wonderful inspiration:
DIY Espresso Bar Cart
DIY Farmhouse Espresso Cabinet
