Tips about the right way to assemble a simple DIY Waterfall Writing Desk with free plans and YouTube video tutorial. This is usually a simple writing desk which may be constructed with a variety of devices and the worth of lumber is beneath $100.
My oldest daughter is in class and spends quite a few time on her laptop computer laptop. She requested, properly begged me to assemble her a small desk for her room the place she might sit and do her work. She despatched me ideas for her desk design and we acquired right here up with this collectively. I like the way in which it turned out! It is a good desk for a small space, and would moreover make a super console desk for a small entry or space. You’ll get the free desk plans with dimensions, instructions and reduce file on the bottom of this publish.
DIY Writing Desk How-To Video
Devices
This desk makes use of a variety of completely totally different devices. This is usually a good beginner woodworking mission.
- drill
- Kreg Jig
- Miter observed
- Desk observed
- Brad nailer
- sander
Kreg Jig
One question we get requested always is… “What’s a Kreg Jig?” A Kreg Jig is a pocket hole jig that helps create pocket-holes allowing you to assemble with super strong joints. It makes turning into a member of two boards sooner and gives you stronger and cleaner joints than countersinking a picket screw. We discovered them shortly after we starting establishing furnishings and it was a HUGE recreation changer for our furnishings establishing! We had been so impressed with how user-friendly they’re and the strong joints it gave our builds! For this desk, I used my Kreg Jig 720 PRO and I LOVE IT! You guys will adore it too… positively positively definitely worth the enhance for these of you that already private a definite model. You presumably can see it HERE on Amazon! You may even strive our video on the easiest way to make use of it HERE!
Lumber for the Desk
The frames of this desk are made with 2×4 framing lumber that we ripped down to 3″ broad each. The best, sides and contained in the desk are created with laminated pine mission panels. These pine boards are generally found on the an identical aisle as dimensional lumber and are generally positioned with totally different desk tops and wrapped in plastic. I generally purchase mine from Lowe’s. You presumably can see them HERE. They arrive in a variety of sizes which is sweet so that you just don’t have an extreme quantity of scrap. We moreover love the way in which during which they stain. I saved the width of my panels the an identical (16″) nevertheless you presumably can modify to fit your space by ripping them down with a desk observed or spherical observed. I made my cross cuts using my miter observed.
Step 1
The 1st step is prepping your picket and making your cuts. As I mentioned, the 2×4 boards are ripped to 3″ broad each. This gives them a very polished {{and professional}} wanting look vs. using the rounded edge. We use our desk observed to tear the 2x boards down on this half. You presumably can see the video of how we do this HERE.
After ripping the 2×4 boards to 3” broad each, make reduce the boards at a 45º angles to create the desk physique. You will create 2 equal frames. Add 1.5” pocket holes on the perimeter of the 45º angles on each
side board.
Join the side boards to the best boards using picket glue and a few.5” pocket hole screws and picket glue to create the frames. Kreg makes fantastic Face Clamps that help to clamp and keep your picket flush on this half. You presumably can see them HERE!
Step 2
Add the best of the desk subsequent. Add 3/4” pocket holes down every prolonged sides of the underside of the desktop. Add a line of glue to the best fringe of 1 physique and join the desk prime flush with prime of the
physique using 1.25” pocket hole screws.
Step 3
Now add the floor side panels of the desk. The best of these are moreover reduce at 45º angles. Add 3/4”
pocket holes down every prolonged sides of the insides of these boards. Add a line of picket
glue to the sting of the side physique objects and join the floor boards using 1.25” pocket hole screws. The pores and skin of the desk side piece shall be flush with the floor of the physique board.
Step 4
Subsequent, add the assistance boards to the insides of the desk sides. These are scraps reduce out of your additional panels. I reduce 4 objects each spherical 3” broad. Line the best helps up on the prime of the desk and place the second set nearer to the underside. Join the first board with picket glue and 1.25” brad nails after which add the second on prime of it moreover attaching with picket glue and brad nails. Repeat this
with the remaining 6 boards. Make a small mark on the sting of the panels on the floor to have a visual of the place these boards are after they’re coated on the final word step.
Step 5
Join the other physique now to the desk physique you’ll have constructed. Add a line of picket glue spherical all flush outer edges of the once more of the physique and join the desk to it using 1.25” Kreg pocket hole screws. Guarantee that all outside edges of the physique and desk physique are flush at this stage.
Step 6
The final word step is attaching the inside panels to cowl all the pocket holes and assist
boards. These boards will give you that waterfall look. They’re moreover edge glued panels reduce to dimension. Add picket glue to the tops of each inside assist board and join the panels using 1.25” brad nails.
Staining the Desk
I decided to create my very personal stain color by mixing three completely totally different stains. This is usually a really pleasing method to give you an rather more custom-made look and it’s super simple! You presumably can strive my reel on how I created this color proper right here!
I used three completely totally different Varathane stain colors to create this. I started with an empty tub from the ironmongery retailer. These are super low-cost. You may even use any empty container you’ll have at dwelling! I mixed two components of Pure stain, one part of Golden Oak, and a splash of Weathered Gray. This gave me the precise finish that I was in quest of. You merely put all of that into the bucket and stir it up solely a bit and likewise you’re capable of go!
Guarantee that to sand all the surfaces with medium and good sandpaper to get a good, gorgeous finish. I prefer to make use of my Ryobi Nook Cat for this! An orbital sander moreover works good!
I sometimes get requested what defending coat I prefer to make use of on prime. My favorite polyurethane is THIS ONE!
Completely different Desk Designs
Check out a couple of of our totally different good desk designs!
DIY Nook Desk
DIY Fashionable Farmhouse Desk
DIY Murphy Wall Desk
Free Printable Plans
DIY Waterfall Writing Desk
- 3 boards 2 x 4 x 8 ripped to 3″ broad each
- 5 panels 16″ x 48″ edge glued pine panels
