Uncover methods to assemble this DIY Spherical Espresso Desk with just a few major devices, low-cost framing lumber, free plans and a how-to video by Shanty2Chic!
I’ve constructed so many DIY espresso tables for my entrance room and others in my years of DIY initiatives! They’re simple to assemble, change the look of a room and they also’re pretty low-cost to assemble your self – having youngsters moreover takes it’s toll on the longevity of espresso desk 😉 This DIY Spherical Espresso Desk is not any exception! I constructed this man with merely 2 2×4 boards and a spherical enterprise panel. Full value in lumber was correct beneath $65! Check out the how-to video beneath!
It’s a good assemble for inexperienced individuals and we’ve acquired a how-to video to data you via the strategy! Merely lick the video beneath to assemble it with us! You presumably can seize the FREE printable plans on the bottom of this submit!
Kreg Jig
One question we get requested continuously is… “What’s a Kreg Jig?” A Kreg Jig is a pocket hole jig that helps create pocket holes, allowing you to assemble with super sturdy joints. It makes changing into a member of two boards sooner and gives you stronger and cleaner joints than countersinking a wood screw. We discovered them shortly after we started developing furnishings and it was a HUGE recreation changer for our furnishings developing! We have now been so impressed with how user-friendly they’re and the sturdy joints it gave our builds! For this espresso desk, I used my Kreg Jig 720 PRO and I LOVE IT! You guys will adore it too… undoubtedly properly definitely worth the enhance for these of you that already private a singular model. You presumably can see it HERE on Amazon! You can also check out our video on use it HERE!
Ripping the boards
Sooner than together with any pocket holes, I ripped my 2×4 boards down to 3″ big each. I desire to make my cross cuts first with my miter seen, after which rip these smaller cuts with the desk seen. We use our desk seen to tear the spherical edges off of the framing boards we assemble with. That’s an optionally out there step nonetheless we like to do it to make the objects of furnishings look dearer and by no means constructed with framing lumber. It truly helps on a assemble like this desk. Ripping them down gives the stacked boards a secure clear look, desire it’s one piece. You presumably can see how we rip our boards HERE!
Assemble the Base
The underside of this desk is constructed using the 2×4’s I ripped to 3″.
Add 1.5” pocket holes to the ends of each board and repair using 2.5” pocket hole screws and wood glue. You may make 2 of these X objects that may be equal.
Join the 4 desk legs to the ends of 1 X piece using 2.5” pocket hole screws and wood glue. The ends of the leg objects may be flush with the X piece and pocket holes coping with up as confirmed.
Kreg VersaGrip™ Clamps
We used our new Kreg VersaGrip clamps to help keep the boards in place whereas we connected on this half. WE LOVE THESE THINGS! The adaptable clamp head is repositionable alongside the bar and may be reversible, so it could be utilized in so many clamping functions! You presumably can see them HERE on Amazon!
Join the alternative X piece to the ends of the leg objects using wood glue and a pair of.5” pocket hole screws. The X may be flush with the ends of the leg objects with pocket holes coping with as confirmed.
Spherical Laminated Pine Problem Panel
I was so excited to look out the laminated enterprise panel for this espresso desk. I ran all through them at Lowe’s. Beforehand they solely carried rectangular panels, nonetheless now they carry spherical in various sizes. I bought the 36″ spherical panel that is 1″ thick for $50. That could be a pleasant worth! I like how these stain as properly, and I like that the panels are 1″ thick as an alternative of three/4″. You’ll uncover it HERE on Lowe’s website online!
Kreg Quick-Flip
As quickly as the underside was full, we used the Kreg Quick-Flip to attach the underside to the desk prime. That’s such a satisfying machine! I benefit from it regularly for varied purchases. Drill a pilot hole and counterbore with one facet, then drive a Kreg Screw with the #2 square-drive bit on the alternative facet. You merely quickly flip it and also you would possibly have the ability to insert the screw. It gives the joinery a extremely expert and hidden finish. You presumably can see it HERE on Amazon!
Join the desk prime
Now join the espresso desk base assembly to the underside of the desk prime. Use 2” Kreg pocket hole screws by the use of the underside and into the desk prime. We used the Kreg Quick-Flip to make this half even less complicated. There may be a few 1” overhang from the legs to the desk prime edge.
Staining the Espresso Desk
Sooner than staining the espresso desk, I used my sander to evenly sand the entire desk. I like to start out out with 120 grit sandpaper after which switch to 220 grit to get a clear finish.
I used three utterly totally different Varathane stain colors to create this. I started with an empty tub from the ironmongery retailer. These are super low-cost. You can also use any empty container you’ve got gotten at dwelling! I blended two elements of Pure stain, one part of Golden Oak, and a splash of Weathered Gray. This gave me the fitting finish that I was trying to find. You merely put all of that into the bucket and stir it up solely a bit and likewise you’re capable of go!
Make sure to sand the entire surfaces with medium and good sandpaper to get a superb, pretty finish. I prefer to make use of my Ryobi Nook Cat for this! An orbital sander moreover works good!
I usually get requested what defending coat I prefer to make use of on prime. My favorite polyurethane is THIS ONE!
DIY Spherical Espresso Desk
- 1 36″ Spherical Laminated Pine Problem Panel
- 2 2×4 framing lumber ripped to 3″ big each
Completely different Shanty Woodworking Duties!
Study Out Our Completely different DIY Espresso Desk Ideas with Free Plans!
Espresso Desk with Hairpin Legs
Farmhouse Kind Espresso Desk
Outdoor Espresso Desk
Observe us!
You may wish to adjust to us on YouTube, Instagram, Pinterest and Fb!
DIY Spherical Espresso Desk
- 1 36″ Spherical Laminated Pine Problem Panel
- 2 2×4 framing lumber ripped to 3″ big each
