Oh hey buddies! It’s just about New 12 months’s and we now have an excellent fulfilling and easy mission for you – the DIY Wine Caddy! This could possibly be good to tote alongside to your New 12 months’s celebration! You’ll see our how-to video on our YouTube Channel HERE!
Check out our DIY Wine Caddy…
How cute?!
It’s a really fulfilling and straightforward assemble guys. You’ll receive and print the FREE PLANS by clicking HERE!
First step is making your cuts. We made all of our cuts using a miter observed. You’ll see the cuts for the 1×4 proper right here.
After making your cuts, clamp the two prolonged objects collectively, and drill a spot on the prime of these boards. You will put rope proper right here later.
Subsequent, we connected our small fast objects to our prolonged base using picket glue and 1.25″ brad nails through the underside piece and into the small facet objects. Add glue to 1 facet of each small piece first.
We used our Ryobi 18V brad nailer to attach the facet objects like this.
Now your caddy ought to seem like this!
Subsequent, we connected our longer boards with holes. We did this using picket glue and brad nails as correctly. You’ll see they’re all spaced evenly on the underside board.
Now it’s time in order so as to add the prolonged facet objects. These are made using craft boards and so they’re very important because of they could keep in your wine! 😉
We connected these using picket glue and brad nails as correctly.
Remaining step was together with stain, rope and {{hardware}}. We stained our caddy Briarsmoke by Varathane, and we spray painted {{hardware}} and connected them to the caddy using our drill. We used these nook objects from Dwelling Depot.
That’s it guys! Suggested you it was straightforward… And oh so shanty! 🙂
