Hey associates! I am so excited with how this DIY Sliding Barn Door Desk turned out! I’ve on a regular basis needed to make use of my mattress room as a home office space too, and I needed a desk that will cowl various junk and residential my printers, so I bought right here up with this! Look how cute it turned out! Proper right here is my DIY Sliding Barn Door Desk…
It’s possible you’ll get the FREE PLANS and supply document for this baby HERE!
Now, let me stroll you via it!
This desk makes use of hardwood plywood. I chosen to utilize birch for this. You buy it at Dwelling Depot in 4×8 sheets, and I had the person there rip it down for me so I’d get it inside the car. I make the cross cuts on my desk observed at residence. I made the packing containers for either side first. These are 3/4″ pocket holes I made using the Kreg Jig. I started by attaching the underside of the sphere to the inside of every aspect gadgets using wood glue and 1.25″ pocket hole screws.
Proper right here is the underside of the desk. The shelf is attached 2.5″ from the underside of the aspect.
Subsequent, I added the helps that run on the very best and once more of the desk. These are attached using 1.25″ pocket hole screws through the assistance boards and into the sides. The pocket holes that run the dimensions of the board should face up. These can be utilized to attach the very best of the desk later.
You will assemble either side much like above. Subsequent, I attached these collectively using the center assist board on the once more. I made constructive the pocket holes had been all coping with the once more.
I added the face physique subsequent. It is going to run alongside the doorway of the desk which will preserve the barn door {{hardware}}.
I attached it by using 1.25″ pocket hole screws through the desk and into the very best board.
I trimmed out the bases subsequent. You probably can miter the corners, or protect them straight. I attached all gadgets using wood glue, my 18g brad nailer and 1.25″ brad nails.
The door frames are subsequent! I constructed the rectangles for these using 1.25″ pocket hole screws.
I decided to make the inside of the doorways using faux tin. I found it on amazon and you might see it HERE!
At this degree, I painted the tin with Rust-Oleum Chalked paint in Linen White.
After it dried I used my nook cat sander to distress it solely a bit.
I attached the faux tin panels to 1/4″ wood panels with improvement adhesive after which stapled these to the door physique!
I stained your complete desk with Varathane Briarsmoke stain.
After that dried I started assembling the barn door {{hardware}}. You probably can see our video of how to do this HERE.
The one distinction is that I used storage door pulleys in its place.
Proper right here is the desk all accomplished up! I LOVE the way in which it turned out!
