Be taught to assemble this DIY Spherical Consuming Desk with free plans and a how-to video by Shanty2Chic!
Hey guys! For these of you which of them have been following us on Instagram and Fb for a while, you already know that I had my residence listed to advertise. I decided to take it off the market and hold and I’m so captivated with it! Residence trying gave me the itch to transform every room in my residence though so I’m starting inside the kitchen with my breakfast area! I’ve been wanting a model new design for my spherical desk so that’s the place I’m starting my makeover!
I designed and constructed this rustic trendy consuming desk for decrease than $70 in lumber! Strive the video underneath to see how easy it was to assemble!
So satisfying and simple correct? Be sure that to acquire the free printable plans and adjust to alongside inside the step-by-step instructions underneath!
Click on on Proper right here to Get hold of the Free Printable Plans!
Learn the way to Assemble a DIY Spherical Consuming Desk
Provides
Devices
Present Document
Bear in mind: I’ve added hyperlinks to the offers inside the supplies itemizing. I choose to order on-line from Home Depot and select curbside ship. I place my order, they textual content material me when it’s ready, I pull as a lot because the curbside area they often load my trailer for me. It’s been a lifesaver since they started offering it!
Setting up the Desk Excessive
Step 1: Planking the Desk Excessive
Reduce the desk prime boards to dimension, in response to the decrease itemizing diagram, and drill 1 1/2″ pocket holes alongside the boards, in response to the decrease itemizing. I used my Kreg Foreman to drill the pocket holes! It’s like a drill press and makes drilling plenty of pocket holes easy a quick! It is best to make the most of any model of Kreg Jig to get this job achieved!
Join the boards together with 2 1/2″ pocket hole screws.
- Tip: We wish to make use of our Kreg Face Clamps to keep up our boards even when changing into a member of! We’re always requested if we use a planer or a jointer to get our desk prime planks really easy nevertheless it absolutely’s not wanted with this easy strategy. You may discover our favorite face clamps proper right here!
Step 2: Slicing the Spherical Desk Excessive
Using a plunge router, decrease a 48″ diameter circle out of the desk planks. You might examine with the how-to video to see how I decrease mine with this DIY router jig. This technique will be utilized to cut all dimensions of circles.
It is best to make the most of a jigsaw to cut the spherical prime nonetheless the blade tends to bend when slicing by 2″ supplies.
- You might uncover the bit that I used to cut the circle proper right here!
Setting up the Desk Base
Step 1: Setting up the Legs
Reduce the leg objects to dimension and drill 1 1/2″ pocket holes on the prolonged end of 4 objects. Bear in mind the diploma bevel cuts inside the decrease itemizing. Join two legs together with 2″ brad nails and picket glue. Assemble 4 leg assemblies.
Step 2: Attaching the Aprons for the Desk Excessive Helps
Reduce the apron objects to dimension and drill 1 1/2″ pocket holes into every ends of the inside of the aprons and three/4″ pocket holes alongside one edge. Begin by attaching the apron to the leg with 2″ brad nails and picket glue to hold them in place.
Adjust to up by attaching the aprons with 2 1/2″ pocket screws.
Join the aprons to each leg.
Step 3: Attaching the Prolonged Runner
Reduce the prolonged runner to dimension and drill 1 1/2″ pocket holes at every ends of 1 side of the board. Join it to the desk legs with 2 1/2″ pocket hole screws and picket glue.
Step 4: Attaching the Temporary Runners
Reduce the transient runners to dimension and drill 1 1/2″ pocket holes at every ends on one side of each transient runner. Join them to the legs and prolonged runner with 2 1/2″ pocket hole screws and picket glue.
Step 5: Attaching the Decorative Ends
Reduce the decorative objects to dimension and repair them to each leg with 3″ picket screws and picket glue.
The Finish
Step 1: Attaching the Desk Excessive
Center the desk base on the underside of the desk prime and repair it to the underside of the desk prime with 1 1/4″ pocket hole screws.
Step 2: Sand and Add a Finish
Now, merely fill your screw holes, sand it down straightforward with an 80-grit sandpaper, adopted by a 120-grit then a 220-grit. I used my orbital sander nonetheless it’s good to use a belt sander or plain sandpaper.
Then merely give it a finish!
That’s it for this DIY Rounds Farmhouse Desk! Be sure that to share your builds with us on social media and use #shanty2chic so we are going to share them too!
Comfy Setting up!
Additional DIY Consuming Desk Plans
Turned Leg Consuming Desk
“X” Base Consuming Desk
Sq. Consuming Desk
DIY Spherical Consuming Desk
-
Miter Observed
-
Drill
-
Kreg Jig
-
Brad Nailer
-
Sander
-
Desk Observed (non-compulsory)
- 1 2x4x8 Framing Lumber
- 9 2x6x8 Framing Lumber
- 1 1/4″ Pocket Hole Screws
- 2 1/2″ Pocket Hole Screws
- 2″ Brad Nails
- 3″ Picket Screws
- Picket Glue
- Picket Filler
Setting up the Desk Excessive
-
Reduce the desk prime planks to dimension and drill 1 1/2″ pocket holes alongside the boards, in response to the decrease itemizing. Join the boards together with 2 1/2″ pocket hole screws.
-
Using a plunge router, decrease a 48″ circle out of the desk planks. You might examine with the how-to video to see how I decrease mine.
